Hello there,
It looks like you have an integrated graphics card from ASUS. We're the same, I have a Intel HD Graphics 4000 from Acers website.
How bout try to check for updates with device manager? Heres how
Go to Device manager > click Display Adapters > Click your Intel Graphics Driver > Then click Driver > Then click update driver > Then choose "Search automatically for updated driver software "
Hope this helps.
thanks for your support.
1. first i will do the bios setup as per your guidelines.then i will check for ctr+E option is dispaying.
2. then i will connect WD hard disk (500gb)--2nos model:WD5000AZRX(6GB/S model) for raid connectivity.then i get back to u.
ok sir.i check it out & get back to u
ok sir i check it out & get back to u
Johnny2,
I know it is not what you want perse to hear but a solution could be to make use of a so called cec adapter, this because intel nuc's dont have build in cec. You can take a look at pulse-eight.
Another solution could be to make use of kodibuntu or openelec with kodi (xbmc). With the cec-adapter it will set your nuc into sleep when you turn your tv out.
The problem you have is i think as follow:
You have a tv with cec, your soundbar also has cec ? When you put your tv into sleep mode the soundbar wil get in sleepmode too. When you activate your tv the soundbar will turn ok due the cec. The nuc you have to wake up manually, but somehow it still remembered the sound device is turned off. With the cec adapter you wont have that problem because when you turn off your tv all devices will get into sleep incluiding your nuc. I have myself a same setup and it works flowless here. Perhabs give it a try!
Hi RescateHistoricoNetworks,
Sorry for the late reply.
Can you provide your motherboard or system model so I can try to find the right driver for your network connection?
Please indicate your Windows* version too. Thanks.
I suggest to install PROSet Software so you'll have the "Use Default" option.
Looking forward to your reply.
Sincerely,
Sandy
Youi need to contact customer support not here:)
Edited post above after some detailed performance testing with the BIOS settings.
EDITED:
Thank you for considering my problem.
All the details:
NUC5i3RYK
BIOS: Two different BIOS’s – 1st - RY0246.BIO, 2nd - RY1944.bio
OS: Win 8.1 64 bit.
Keyboard: Logitech K930.
Settings in BIOS:
1. All settings identical to your's above - Can get USB keyboard wake from S4 (Hibernate), cannot get wake from S5 (Off).
2. All settings the same as your's avbove except 'Wake on LAN from S4/S5' unchecked: Cannot get any 'Wake on USB from S5' or wake from S4.
Why is there an interaction between the Wake from LAN settings and the USB action?
I had initially disabled Wake from LAN because the NUC keeps doing exactly that; every time another PC on the network looks at the network shares, the NUC wakes up and boots, which I don't want as this is a HTPC At the moment, I can't recomend this as a HTPC because of these wierd power switching issues.
Can you please test your setup in the Lab with 'Wake on LAN from S4/S5' disabled, and report what happens? Testing needs to include both the off condition and the hibernate condition. Thank you in advance for any response to this as it would be most appreciated. If I can't get this working I will need to return this device as faulty.
warm regards,
Hobentus
what I mean here is asking if he worked out anything about fixing the slow performance or find the reason of it
He doesnt do a thing actually just as other intel persons here only way to get things fixed is contacting technical support trust me:) look at the cir topic. They only did something because of the ticket i created
Hello,
I have a Lenovo Y50-70 with an Intel i7 4710HQ, wich most of the time, i am using it with the lid closed and connected to a 28 inch external monitor. Everything is fine, until i put my computer to sleep. When i resume from sleep, the frequency of the CPU will be stuck at maximum 1800 mhz. If I open the lid just a little bit, to have an image on the laptop monitor, the speed is back to normal, at 2500 mhz. Close it, and again back at beeing stuck at 1800 mhz. I have the same problem on Windows 7 and Windows 8, with every power plan available. Also, i have the same problem, when i disconnect the laptop from the monitor, just to get it in bed with me. While im running on the laptop monitor, the cpu speed is fine but when i get the external monitor connected again, the cpu is stuck at 1800 mhz. The only sollution is to restart the laptop. After that, it will run fine just until i put the computer to sleep or i disconnect the monitor from it and connect it again. So, how can i fix this problem?
I have a Toshiba Satellite laptop it has ACHI but no RAID driver. My chip is AMD. Not intel. Can I still download a intel RST driver? I want to install a 1TB HDD but someone told me I need to have a RST driver or file or something. Can someone help me? What information do you need from my laptop?
thanks after a long search i found that those 2 lines are critical to get it going
Hello
We are using Arduino Extension board and I see following error some time
[ 196.122678] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 197.444035] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 198.125144] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 201.010012] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 201.589591] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 204.114065] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 208.158045] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 209.399666] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 209.761383] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 210.281141] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 210.641395] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
[ 211.282296] i2c-designware-pci 0000:00:09.1: i2c_dw_handle_tx_abort: lost arbitration
This is the thread talks about it .
GPIO access from linux can crash the GEN2
IS there a solution for this problem.
Thanks,
Hemant
Sounds like the same problem I have.
Dear RescateHistoricoNetworks,
Thank you for providing your system information.
You may refer to our website for the default values of advanced settings:
http://www.intel.com/support/network/adapter/pro100/sb/CS-029402.htm
In case you still encounter poor connectivity, here are the settings you can try under Performance Options:
1. Interrupt Moderation Rate - OFF
2. Increase Receive Buffers - Default 512 / Range 128 - 2048 in increments of 64
3. Increase Transmit Buffers - Default 512 / Range 128 - 16384 in increments of 64
For Receive and Transmit Buffers, you may set it to 1024 or max at 2048
Info Driver
12.10.29.0 built by: WinDDK
Driver Date: 02/05/2014
Location: PCI bus 0, device 25, function 0
Intel PROSet Version 20.0.10.0
- I noticed you have updated the network adapter driver from the previous version 11.15.16.0 and have PROSet installed.
- If you continue to experience poor connection, please re-install the customized driver provided by HP -
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5225042&swLangOid=8&swEnvOid=4061
***This link will take you off of the Intel website. Intel does not control the content of the destination website.
Click on Driver - Network
Click on "Intel PRO/1000 Drivers release 19 (Win.7-64) (International)" to download.
Hope this helps improve your system's connectivity. We look forward to your test results.
Sincerely,
Sandy
why is it that, if uninstall the Intel PROSet /Wireless Tools and the network cards and then reinstall this PROSet/Wireless Tools version Wireless_15.3.1_s64 it allows me to connect? However, once i disconnect it will fail if a try to reconnect.
With i2c port on Galileo connected to OV7260, I am unable to detect the slave port.
thanks
Sam
I thought you could not get any keyboard to work.
In my case I had at least one that worked.
Well at least I have a plan B but it would still be cool if I could get it to work like this.