Re: Yocto & Linux Material
Closest thing to a tutorial, I highly recommend this, it teaches you basically everything you need to know to rebuild kernels...
View Article使用红外库出现问题
我用了IDE里面提供的红外发射接收库,但是编译的时候出现了IRremote.cpp:24:27: fatal error: avr/interrupt.h: No such file or directory我到网上查找了一下,也找到了interrupt.h...
View ArticleRe: First day ok with 13V. Second day short circuit
I have a very similar problem - started a new thread before I saw this one.I think there is a defect in the 12 V / Vin circuitry - maybe even some sort of board fault. Regards,jwestmoreland
View ArticleUsing CoAP Protocol for Intel Galileo
Hi Dears, Just wondering if any community member has used CoAP protocol for Intel Galileo? I am looking for a CoAP/RPL/6LoWPAN stack compatible for Galileo. Any advise or suggestion? PS: CoAP is the...
View ArticleIntel Core i7-4790 4K at 60Hz
Hello! Is it possible to play games (specifically GTA V) in 4K at 60Hz with the integrated Intel® HD Graphics 4600 without any problems or difficulties?
View ArticleRe: DN2820FYK no signal randomly
Thank you for your reply Joe.I have tried several different brands of HDMI cable, all give the same 'No Signal' message on my TV. Interestingly if i completely unplug the HDMI, the TV says 'No...
View ArticleGetting segfaults (Edison, Ubilinux)
I'm trying to get a WSN software (xserve) running on my Edison.I've gone through the installation just like I did with another PC which runs Ubuntu 12.04LTS.The software runs fine on that machine but...
View ArticleHow to use arduino for VS2013
我看了一个帖子,介绍用VS开发arduino,就下载插件安装试了试,上面说的vs环境是2010,2012。我的是2013 update 3,好像是可以了,但是出现的东西不一样,比如新建文件不是arduino,而是变成了sketch project.所以想问一下,用vs2013开发会不会有什么影响或者不兼容情况。
View ArticleRe: Analog Sampling Rate very low
start = clock();for(count = 0; count <1000; count++){ filed = open("/sys/bus/iio/devices/iio:device1/in_voltage0_raw", O_RDWR ); nbytes = read(filed, buf, 16); close(filed);}end = clock();...
View Article/dev/root out of space,Is it a bug still now?
I do this follow https://communities.intel.com/message/263294#263294but /dev/root out of space as below,this situation is not change!
View ArticleRe: Intel HD 4600 screen flickering.
Hi, I've already tried using the drivers that Acer provided for this specific laptop, and they did exactly the same thing. I've also tried 3 different bios versions. I've tried version 1.08, 1.13, and...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Hello, im using ubilinux but i'm really a newbie. How i can mount the sdcard and the usb on the arduino borad?? thanks a lot
View ArticleRe: Kernel build error?
Hi,Hard to say, but doing a "grep" inside device-software for mkimage, I found out that the output paths of it are patched by...
View ArticleRe: Windows 7 BSOD when installing On NUC 54250
Were you able to install operating system following URL information?When installing Windows 7 make sure the image contains Windows 7 SP1 Allan.
View ArticleRe: Does anyone sell an inline battery that would let me use the NUC like a...
See this post:How to Post Questions and Discussions Allan.
View ArticleRe: Intel Core i7-4790 4K at 60Hz
The Samsung U28D590D should work without problems since it supports 4k according to this URL Samsung UHD 28” Monitor (U28D590D) | Samsung Monitor , however I haven’t tested it.
View ArticleRe: Bluetooth connection to phone
Thanks Zhihai, I have followed the posts. This in particular is what I get following yours:I had a bunch of complaints about not having the A2DP profile available so I bit_baked in PulseAudio This is...
View ArticleHow to get wifi SSID and BSSID information from Galileo and Edison
Hi, How to get Wifi statistics from Galileo and Edison, like SSID, BSSID and "wifi active for" ThanksBREL
View ArticleRe: Intel Edison Arduino Breakout SPI
I made a mistake and sent you the wrong link. Someone already made the drivers to run purely on the SPI arduino library (link)and it works on the UNO. ADConverter So not sure why it does not want to...
View ArticleRe: Edison thermal_zones - clarification/documentation
Intel_Alvarado,The boards have been flashed. build_16To replicate the results, All I need to do is open my window to get a breeze to cool my edisons down.root@ebob1:~# cat /sys/class/thermal/*/temp...
View Article