Re: Does Intel motherboard D101GGC revision AAD35788-305 support Pentium D 945 ?
Mark, it will be necessary to have revision 308 or later to use a Pentium D processor 945 on this motherboard. In addition to that, it also required a specific BIOS version to validate the microcode....
View ArticleRe: Error provisioning new machines
If you are using NETWORK SERVICE, that IMHO it's the most secure option, you should use RCSUtils.exe that can be found in Intel SCS\IntelSCS\Utils folders in intel zip file:Use this syntax to add the...
View ArticleRe: vPro OOB demo AMT 8.1.20
But now you brought further details... can you confirm your maker and model of your vPro system? I'm assuming that as far you can get access through WebUI and also been able to connect using PS, it's...
View ArticleRe: "mesg" in /etc/skel/.profile
mdwI can confirm, that I get that message as well, on build_68, although this issue may have been addressed in the latest firmware image.As the ./profile you described is referring to the bash shell, I...
View ArticleClik here to view.
Re: Galileo HTTP server fails to restart on re-download
Hello bradneedham, What firmware do you have installed on your Galileo? Check the firmware using this command cat /sys/firmware/board_data/flash_version. Also what happens if you only reset the sketch...
View ArticleRe: USB-power stays on when device is off
HI!I have a D54250WYK and the similar problem. Even when I shut down the NUC completely, the connected USB 3.0 HDD (WD 3TB green) stays on and never goes in to the standby mode. The Bios (0032) and the...
View ArticleRe: How to run a prog even after terminal closes
that did it! thanks mhahnboth the solutions were useful things to learn deium& mhahn
View ArticleRe: Intel Edison + Arduino Breakboard -- Eclipse Kepler
jchozas,The sketches get loaded by the clloader on Edison in the /opt/edison/launcher.sh
View ArticleIRST: ERROR TRYING TO KEEP EXISTING DATA WHEN CREATING NEW RAID 1 VOLUME
Hello All. I am from Italy sorry for my bad english.I have the same problem of this discussion left not solved Cannot keep existing data on a disk when creating Raid 1 volume with IRST ? My system came...
View ArticleRe: Is UDP library fixed in last update?
Hello dpc27, As far as I understand, no it hasn't been fixed yet, but we will report as soon as it's been fixed.If you want to keep up to date this with this subject, be aware of future Release Notes...
View ArticleRe: Edison with the PiTFT
I am using the adafruit raspberry pi display and the breakout board is the small one.
View ArticleRe: Intel HD Graphics x Nvidia Optimus x 3D Software Problem
I checked the BIOS there is no information on GPU there. My computer is this one:custom gaming laptops - Welcome to Sager NotebooksI got the Geforce 980M + 32Gb RAM + SSD. Windows 8 PRO (64 bit) I Use...
View ArticleIntel driver update utility is showing failed when trying to install Intel HD...
Intel driver update utility is showing failed when trying to install Intel HD graphics driver on X553M Windows 7 32 bit Below is the debug file info DriverUpdateUI.exe Information: 0 : Log File Created...
View ArticleRe: Detailed Edison Module GPIO Definitions
Yes, I do fully understand! I started a bit before you (I will just say I started in high school with an IBM 1620 doing Fortran 2) and completed my Masters in CS over three decades ago... I did have a...
View ArticleClik here to view.
Re: Is UDP library fixed in last update?
But there I only can find the release 1.0.0, and last release is 1.0.4:Intel® Galileo and Intel® Edison Release Notes for Arduino* IDE v1.5.3 (v1.0.4) I mean, it will be great if all releases would be...
View ArticleRe: Cannot find /dev/cu.usbserial[n] when flashing Edison on Mac OS X Yosemite
Is there a specific brand name USB cable you're using? I've tried several now and have very intermittent success using screen, and have never been able to upload the "blink" test sketch, much less...
View ArticleClik here to view.
Re: Unable to connect to WPA2-PSK on Windows 7 Ultimate 64 bit
Thank you for taking this forward. Should I try with Windows 7 Professional x64?
View ArticleRe: Intel Edison + Arduino Breakboard -- Eclipse Kepler
Hi, I plugged my Arduino breakboard and LED IO11 starts blinking (just like yesterday with cross-compiled file) after booting Yocto Linux althoug there is no 04_cpp_onboard_LED_blink file in /tmp. I...
View ArticleRe: Intel Edison + Arduino Breakboard -- Eclipse Kepler
the yocto Linux uses systemctl (instead of init.d), and clloader for starting.I am going to as KurtE if he can help you with this.
View ArticleRe: Who knows Edison's GPIO base address
Again without seeing your code, can not help very much. Just to verify things are working and you have a version of MRAA running that you think you have. It would be good to add a call in get the...
View Article