Re: ESRV_SVC error
Hello Stevem, I searched for this error and I was able to find out that the error is related to a Sony driver. Please check the picture below.SystemLookup - ESRV_SVC
View ArticleRe: Change the "Hard Drive Write Cache Enabled" setting on DP35SP
Hi Hugga, Sorry to hear you are having problems but let me help you with that. Since you are using a Mirror volume (raid 1) the easiest way to fix it I would say is to access CTRL-I and set the drives...
View ArticleRe: Serious problems with D34010WYB & D54250WYB and USB 3.0
Good afternoon+1 with the same problem, I am in endless bootloop until I disconnect the USB hub and disks. ( NUC 3217 ) can we expect any fix for that, please? Thank You
View ArticleRe: Missing +HS(High Speed) functionality in 7260 AC
Hi Sylvia_intel, I have Generic Intel drivers and not OEM. I am missing the HS enable option in Bluetooth propertiesthat is shown in the image you provided, thank you for showing me this helps me a...
View ArticleRe: Serious problems with D34010WYB & D54250WYB and USB 3.0
Hello, I am sorry you are having problems with this. Please note that we have received reports from other customers and we are investigating this issue. We are working on this in a different post so I...
View ArticleRe: Serious problems with D34010WYB & D54250WYB and USB 3.0
Hi Kevinthanks for reply, I will look for the solution here - and btw, I need to report I just love the idea of NUC CheersMJK
View ArticleRe: Intel HD Graphics driver freezing OS at logon?
You may want to uninstall the current driver version and remove the third party graphics card before installing the latest version. It might be a good idea to update the BIOS too.
View ArticleRe: Logitech K400 keyboard laggy and jumpy on my i3 NUC
i'm using k400r (newer model) with unifying receiver and at first i also had issues with jumpy cursor and laggy input.i moved the nuc power brick as far as i could from the unit and the issues are...
View ArticleRe: intel centrino advanced-n 6235 sporadic dropouts and freezing
Hi Joe, got mostly the same issue. But additional sometimes the reception quality info jumps to 5/5 and the speed of my WLAN is nearly zero. Is there a new driver in sight? regardsSchmalli
View ArticleRe: D54250WYK unexpected crashes/poweroffs
I've had the same model of NUC and wifi card for around 6 months (very soon after release) and I've experienced similar issues on and off for most of that time. I'm using HDMI out to my TV, and I've...
View ArticleRe: Intel HD 3000 graphics Update problem.
Okay I will try that, but before I do, May it work unistalling Intel Graphics in control panel and Installing the old version that ASUS offers in drivers section in the website of my laptop model? The...
View ArticleHow can I setting up Xbee module with USB Jumper???
Hi guys,first of all excuse me for my bad english!!I'm a new user of Galileo board.I must connect 2 xbee and I use a xbeearduino shield by M. Yarza. With Arduino Uno ther is a mode to send directly AT...
View ArticleRe: Intel NUC DN2820FYKH
Hi Hans_26789, I am moving this post to the Intel NUC Support Community. Regards,Intel_Jesus
View ArticleRe: Memory Issue for DZ87KLT-75K
Hi TomTech Sorry to hear that but just as a heads up iv always used the BIO file to update. This is how i did the update:I'm Running Windows 8.1 and i had set up secure boot. 1. Always reset the BIOS...
View ArticleRe: Memory Issue for DZ87KLT-75K
Sorry about that spelling mistake, Oh i meant "Rear" rear panel of the computer, thanks for pointing that out and I'm glad you updated with no issue, when i performed the update to 0451 it was...
View ArticleIntel® Dual Band Wireless-AC 7260 issue with "No networks found" after...
After installing Windows 8.1 on my Intel NUC computer, I tried to setup the wireless connection. Initially there were "No networks found." After a few restarts of both the computer and the network...
View ArticleIntel® Dual Band Wireless-AC 7260 issue with "No networks found" after...
After installing Windows 8.1 on my Intel NUC computer, I tried to setup the wireless connection. Initially there were "No networks found." After a few restarts of both the computer and the network...
View ArticleRe: Intel AC7260 problems
So there seems to be some positive news for me. I installed a recently released BIOS/Firmware update with the hope of it fixing some touch pad related issues. While it didn't fix my touch pad issues,...
View ArticleRe: NUC HTPC Sound issues
I have the same issue and have tried your solution. However, i'm still not sure that everything is correct. Here a screenshot of my device manager. Should there really be two audio devices like it is...
View ArticleRe: NUC Haswell reboots after shutdown
I get the same problem when I try to change something in my BIOS
View Article