Re: Trying to build the flash cap file
Charles, please provide more details about the Makefile problem: error message, Linux distribution used, etc.
View ArticleRe: BSP 1.0.0 full (SD card) and SPI images + firmware are available
Joining other folks - don't give up just yet! :-) You can do a lot of things with Galileo without diving too deep (or at all) into embedded Linux part of it. If the program, which worked on FW based on...
View ArticleRe: DC53427HYE hangs at Intel bios logo when USB 3.0 DAS is connected
Greg, I already asked them, but I'm still waiting for an updated.The following thread has a workaround but for the DN2820FYKH, just in case you want to check it...
View ArticleRe: USB boot device bug still present on DQ77MK
Thanks for your feedback. I'm glad it worked!
View ArticleRe: NUC d34010wyk doesn't boot with dual monitors
Well, it seems that so far the common factor is the miniDP to DVI cable. I may suggest an active video converter instead of the passive one you are using.
View ArticleRe: X540-T2 Issues (iscsi)
HAHAHA! Ok, right. I see what has happened. The bit I was missing was 'close the guide me pop-up window' Thinking I was on a reputable site, with a reputable company, with a trusted SSL certificate...
View ArticleRe: WiDi does not manage to play DRM protected videos from Windows 7.
Thanks for the article, I wasn't able to watch this free video though because of geographical reasons. However, I found this:...
View ArticleRe: HD 4600 HDMI audio problem
I would recommend you to continue following the other thread since it is from the graphics community. You can also leave your feedback on this thread https://communities.intel.com/thread/49681
View ArticleRe: NUC kit D54250WYKH: video playback stuttering in Windows Photo Gallery...
sadly, that didn't help... also, just to test and see what it would do, I changed the transition speed in the Photo Gallery screen saver settings from slow to medium to fast and back to slow. On...
View ArticleRe: X540-T2 Issues (iscsi)
Since I can't reply to your email, you guys are so obfuscated it's annoying. Thanks Mark, I appreciate the assistance. Too late to stop me looking like a fool to the client (and I guess to Intel...
View ArticleRe: Intel NUC D54250WYKH Memory issue
The NUC won't boot, it won’t even access the BIOS. It will give you a memory error (3 blinks)
View ArticleRe: Only 54Mbps with Intel Centrino Advanced-N 6205
The Wireless Mode drop down menu has six options which include 802.11a/b/g. There is another property named 802.11n Mode which can be Enabled or Disabled. Is it possible that you modified your system...
View ArticleRe: D34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0...
Steve_R, RMA means replacement, I’m sorry I wasn't clear with you. Since you are still having problems with your product, you may want to replace it. Just in case, I already asked if a new USB 3.0...
View ArticleRe: Has initialization of serial port ttyACM0 changed in 1.0?
As far as I can see, quark-init recipe provides a mean to autoload drivers upon board is booted. I can't recall whether it was called the same in 0.9.0, but the same functionality was there for sure -...
View ArticleRe: HC-SR04 Sketch
Glad you got it working. Any chance you could publish the sketch? Thanks
View ArticleRe: Creating SD Card image from 'direct' file?
You're on the right track. As you've already found out - that file is simply a direct block device image, so dd is your best friend here. As for the speed - that hugely depends on the SD card and card...
View ArticleRe: How to access USB host from Linux (Python)?
Okay, here goes the ftdi_sio module:http://alextgalileo.altervista.org/pkgrepo/clanton/kernel-module-ftdi-sio_3.8-r0_clanton.ipkor "opkg install kernel-module-ftdi-sio" (don't forget to enable the repo...
View Articleclloader in a Linux Base Image (clanton-full) build not working?
Hi there struggling to make the Arduino IDE on Linux play nice with a galileo running a rebuilt LSB image, "clanton-full" build. I have rebuilt the cross compiler tools, can build eglibc Arduino...
View ArticleRe: OpenCV, Arduino IDE and Linux LSB
OK, I can kind of make this work, but only by manually copying sketches to /sketch/sketch.elf and rebooting the board. I am having some trouble communicating with clloader ... will post a different...
View Article