Re: Serial output over SSH
faceplant wrote: I don't know how the Edison Arduino software is setup, but have you tried just doing a printf, or outputting to std::cout / std::cerr?This doesn't seem to work - at least not by...
View ArticleRe: Can nano be installed on Edison
why not - just compile it and run it.Or bitbake nano within a Yocto build. My 2 cents
View ArticleClik here to view.
Re: USB Gadget Mass Storage image location
alternatively mount with an offset parameter of 8192
View ArticleRe: SSH to my edison?
Try editing the systemd service. I am sure it will work whether you have a password or not.
View ArticleRe: How best proceed with overheating i7-4790K?
So everyone responding in this topic with the issues have a L4 batch CPU? Intel is too quiet at the moment imo so I guess we have to do our own research..
View ArticleRe: Missing configure_edison?
This error I get when I try to: root@edison:~# ./configure_edison --help-sh: ./configure_edison: not found Without the "./" it works for me. Did you check if the configure_edison file is in /usr/bin...
View ArticleRe: SSH to my edison?
AnthonyWeb: I used the command configure_edison --setup. This configures the wifi, the password and there is something in there that enables the sshd server. Rui: The password requirement was enabled...
View ArticleRe: Wireless card stops working after hibernate with 17.1.0.0
I've got the same problem after updating to 17.1.0.0 I deeply regret using the Intel® Driver Update Utility PC: Sony Vaio Pro, 64 bit
View ArticleRe: How best proceed with overheating i7-4790K?
Mine was described by the retailer as:- Intel 4th Gen Core i7 4790K 4.0GHz 88W HD4600 8MB Quad Core CPU
View ArticleRe: Info about SKUs listed at Mouser?
Hi,and then the last part that doesn't reflect a change in the description (matches up with .MP or .S part of the product number)I just had a look at Mousers Edison overview page...
View ArticleIntel RST in dual boot
I have an Intel D945GNT system board with Intel cpu and four SATA drives attached configured under Intel Matrix Storage Manage/Rapid Storage Technology as two RAID 1 pairs running under Windows XP Pro...
View ArticleRe: Wireless card stops working after hibernate with 17.1.0.0
<<I deeply regret using the Intel® Driver Update Utility>> Got a Restore Point? Roll back that way. Or, go to Device Manager, click open the adapter to the driver tab. If "Roll Back"...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
And does the sticker on your box says: Batch: L4xxxxxx ?
View ArticleRe: Missing configure_edison?
Hi Sergio, Thanks for getting back to me. The image I'm using was downloaded from the Edison Software Download page. It's the Edison Yocto complete image as recommended in the Flashing Edison (wired)...
View ArticleRe: I have bought a new 55 Inch LED LG 55UB850T , I am not able to find my TV...
Hi I checked windows firewall , It is disabled. Also updated the software through tool given by you. But it resulted in nothing.I am not using any router for connection. My LG TV has screen share mode...
View ArticleASUS P5Q3 - Intel chipset and SSD v300 AHCI?
Hello, can you help me please with my chipset driver, my mobo is "Asus P5Q3" - Motherboards - P5Q3 - ASUS and i wolud like to install properly chipset driver and use my SSD in AHCI mode with best...
View ArticleRe: S1200V3RMP / XEON E3 1275V3 HDMI audio problem
Hi Dan,thanks, I have now relegated the S1200V3RPM board to stereo only audio use, which works fine. I have built a multichannel Audio streamer using an ASUS board which works fine also.Thanks for your...
View ArticleS1200V3RPM - NIC not available during boot
Hi all,I have the following problem with my S1200V3RPM board and Server 2012 R2: Right after boot, jRiver MC20 tries to find its library server on the network. At this time the NIC of the board does...
View ArticleProblem with Intel NUC DCCP847, it dont boot when istall graphic drivers
Hello I have a problem with my new nuc. I install: 2x1GB Hynix 1333 Ram, 240GGB Cruzial msata ssd. I can install windows 7 with a cd without problems and it starts, but when i install the intel HD...
View ArticleRe: D34010WYK issue with USB 3.0 HD
Hi joe_intel, I upgrade bios version 30 WITH windows 7 USB3.0 controller version 2.5.3.34 : no change. After a cold start, nuc doesn't see the disk. If I unplug/replug the disk, even after 5 minutes...
View Article