Power options for Edison mini-breakout board
Hello everyone, I'm waiting for my Edison Board + Mini Breakout to be delivered and I was wondering how I'm supposed to power it. As far as I understood, I can either apply 7-15V on J21 or use the USB...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
Thanks for the reply's. I've tried looking around on my router settings but no luck. I'm unaware of whitelist to be part of my laptop but, I'll contact Dell and see it is.
View ArticleClik here to view.
Re: How to get I2C commo using Edison Arduino breakout board?
Thanks, I got the I2C to "work" using A4/A5. Not sure why SDA/SCL on the digital pin jumper doesn't work. I can read the I2C address of the sensor most of the time, but often it still reports no I2C...
View ArticleIntel HD Graphics 4000 - won't update driver
check out this screenshot. http://i.imgur.com/t4vBTn0.png I am convinced i'm downloading the correct driver. Please help. The auto-detect in Windows fails, actually fails with multiple if not all...
View ArticleRe: Yocto Linux start problems
J13 is for thermistor input into the lipo battery charging circuit. The default position (aka thermistor is not connected) is to have pins 2 & 3 shorted together via the jumper. In which J13 jumper...
View ArticleRe: USB 3.0 external Hard Drive not detected after computer starts up, USB...
Littlemic I think it must be a compatibility issue between the Intel controller and Seagate external drives. My Chipset is Z97 but Gigabyte uses the Intel controller version 3.0.0.16 and it works for...
View ArticleRe: I bought an Asus laptop with intel i3 and it FPS for some reason droped
Im currently updating 3d video controller for intel i3/64 bit win 8, is dat good?
View ArticleRe: Let's make pps_gpio work on Quark/Galileo
gigneil gigneil, LDiego_Int Good news, after working on this for a while, I finally got a breakthrough and I'm now able to get a PPS GPIO interrupt working in connecting an Adafruit Ultimate GPS logger...
View ArticleGot GPS PPS GPIO interrupts working correctly on Galileo Gen2 board :-)
Fellow Galileo Makers, I got a breakthrough today and was able to get PPS GPIO interrupts working with a Galileo by doing some minor Galileo kernel modifications to the Galileo Gen2 plaftorm driver...
View ArticleRe: Yocto Linux start problems
In default position pin 2 and 3. DS3 Led is on. In the other position it seems work well but DS3 Led is intermitent..In both positions j2 have 0.6 volts. I´ve checked partitions and i found this...
View ArticleRe: Issues with i2c on Galileo gen2 board
I tried the same camera module using Arduino uno and i2s scanner sketch was able to detect the device at slave address 0x21.
View ArticleClik here to view.
Re: Intel AC7260 limited access after sleep
joe_intel: It appears that philsward found a very simple configuration fix to this problem as described in the following post: https://communities.intel.com/message/253403#253403 I've been running on...
View ArticleRe: OLED Display + Edison Breakout Board + Node.js
Curious how you transferred the nodejs code to your edison? I dropped a hello world file on via USB but cant find it in the edison OS anywhere. Really wish I had SSH into this thing so I could just...
View ArticleRe: Building Linux image for Galileo Gen 2 in Ubuntu 14.04
Hi Matt, I think I did see the errors in "linux-yocto-clanton_3.8.bb do_kernel_configme". I'm not sure what error you got. The error I encountered was about tar version. I have tried tar 1.24, 1.25,...
View ArticleRe: Graphics Problem with LT Running Windows 7 Home Premium 64Bit
Hi Kory I did that - uninstalled the device shown over there and rebooted my machine, while it got re-installed, but the problem continues. Will Reinstallation of Windows help and also can you please...
View ArticleRe: 19.2 MHz Clkout / IO-Ports
Hi,I'm asking of programming the clkout to another frequency, such as 25MHz.Typically such a clock is part of a programmable clksybsystem with predevider or postdivider of a pll. The frequency is quite...
View ArticleRe: Debian on Edison
Hi Razvan, it is possible, I did it already. There are two things you have to consider: the kernel itself and the root file system are two different things. When you are talking about having the Debian...
View ArticleRe: Anybody booting latest NUC boxes headless and running Linux & VNC?
I have the DN2820FYKH, I updated to latest BIOS updated 0039, and the NUC don't boot anymore headless. I tried the dummy HDMI to VGA adapted to lure him into there is a display wired, but no luck...
View ArticleRe: OLED Display + Edison Breakout Board + Node.js
Anthony, There is an ssh connection available on the usb gadget device. On the Arduino board, it's the micro usb near the mini-switch, with the switch towards that connector, and on the mini-breakout,...
View Article