Re: DTS passthrough via HDMI possible with D54250WYK?
what are the changes in 0028 BIOS? there is no changelog for this release...
View ArticleRe: Using Galileo Linux over Ethernet(Telnet)
Hi mak3r, I'm using the following the same method, upload the sketch (below) thru USB then connect my PC's LAN port to Galileo's LAN port. Sketch:void setup(){ system("telnetd -l /bin/sh");...
View ArticleRe: Galileo Gen 2 not detected in device manager
Folks, I've USB problem too with Galileo Gen 2. When I boot it without SD-Card, I can only detect it on my PC (Win 7 64-bits) for the first time. If I unplug the USB or reboot the board, the connection...
View ArticleClik here to view.
Re: Problem updating Graphics Drivers
Thanks for your reply, but as after tinkering around for a little more, I managed to resolve the problem. Sorry for bothering
View ArticleRe: Move RAID to new Dell XPS
hi joe, i've done something similar in the past. It's mostly doable but you should not boot from the original system raid array, as you may risk losing the data. You need to use a new drive (or raid...
View ArticleRe: How to connect Arduino 1.0.5-r2 software with Intel-Galileo Board?
Hi Diego,Nope, i clicked Arduino IDE for window. When i choose the dpinst-86x, it keeps appear the mssg. So i choose dpinst-amd64, it can run the arduino nw. Is there any differences between them?...
View ArticleRe: Sharing information about compiling Edison OS with Yocto.
Quick note: ./flashall.shwithout any parameter is now good enough. Once you have flashed Edison, runconfigure-edison --setupto set name, password and wifi. To enable bluetooth,rfkill unblock...
View ArticleRe: DHT workaround for Galileo and Galileo Gen2 using 2 pins instead of one
hi ek,First i am thanking you for the response, i Hope it will help me.I want to measure the temp. and humdity for my room and and put the value in webserver but graphic .I think that I did the...
View ArticleRe: Problem with RAM Crucial CT102464BF160b.C16FER in Intel NUC D34010WYK
Thank you Sylvia for your answer. I really appreciate it. Unfortunately I have tried to start NUC with RAM Kingston KVR16LS11/4 but it failed.By the way could you answer me is NUC able to start without...
View ArticleRe: How do we use the host USB port ?
It sounds like week 35 image source package is the good one!I ran the bitbake command four times to get my image (every time I got an error, I re-ran the command)but now, I have all interfaces in /dev...
View ArticleRe: DN2820FYKH does nothing
Exactly the same thing here. My RAM is not on the list (Corsair cmso4gx3m1a1333c9), I started up the NUC with no memory, hoping to see the power LED blink three times to indicate a memory issue. But...
View ArticleRe: DN2820FYKH does nothing
So it seems that your NUC isn't working right? At least my power LED blinks how it's supposed to be. I just can't check my RAM on another computer or so...
View ArticleRe: Broken U.FL connector - advice?
I'm glad it has been addressed. That sounds so much better.
View ArticleClik here to view.
Problem with Native (Straight) Sound via HDMI
Hello I have Lenovo Z580 with Windows 8.1 Pro, Intel HD 4000I plugged my Yamaha rx-v375 AV receiver via HDMI.I set audio configuration to 5.1 surround sound and set native(straight sound) without any...
View ArticleNUC DE3815TYBE XP
Hello. Now I know what youre all thinking.... XP... whats that? This liitle NUC lablled in some spots as a TYKE and internally as a TYBE is doing my head in. It works perfectly well on Windows7 But, I...
View ArticleClik here to view.
Re: Problem with Native (Straight) Sound via HDMI
When I set 5.1 surround sound in control and set rest of configuration:I use stereo source.My sound receiver shows all 5 channels(I have not subwoofer yet), but sound is producing only by front left...
View ArticleRe: D54250WYK Windows 8.1 low memory error
BIOS didn't help. Still getting the error when I check after an hour or so. I am running the NUC's display via a DP->DVI adapter (MacMini), then into a KVM switch, which completely disconnects the...
View ArticleRe: DHT workaround for Galileo and Galileo Gen2 using 2 pins instead of one
ek,i have already the diode and the resistor connected but it doeswork i am trying this expermiment everyday and without result .Please Help me regards Ahmadto
View ArticlePlan to sell the SoC as a standlone?
I think the Edison module is a really interesting product. Is there any plan to sell just the SoC as a stand alone board?
View ArticleHigh Temps on cpu i7 2600
Recenlty i discovered that my cpu runs in high temps.For example if i run google chrome and a game my cpu's temps go way higher than 72 Celcius.Is this normal?
View Article