I tried the same RAM, SSD, and Wifi card in another NUC and they worked fine. I tried clearing the CMOS to the default settings, but I still couldn't get the display. I just received a replacement NUC D34010WYK, and ran through the installation of Win7 64-bit Ultimate again. After doing this, the new NUC ran fine. Windows loaded, I installed the Wifi drivers, USB drivers, and updated Windows. For my display, I used a mini-HDMI to HDMI cable, and plugged this into my monitor (1920x1200). Everything works fine. I then took this working system over to my LG 32LB5600 32-Inch 1080p 60Hz LED TV, and plugged it in using the same setup, and mini-HDMI to HDMI cable. The LG TV would then not display anything on the screen. It recognizes that a device is plugged into the HDMI port (ie lets me select that port number), but I see nothing on the screen. I tried unplugging all USB devices, and just plugged in the power and HDMI, but still nothing. I know that it is booting fine since I can enter my Windows password, then hit Ctl-Alt-F4, then Enter to shut down the NUC. Any ideas what is causing the screen to not display. I am moving from a 1920x1200 monitor to a 1920x1080 TV. Do I need to change the resolution, and force it to stay? Thanks.
↧